Main Power Window and Door Lock/Unlock Switch

MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

Removal and Installation


REMOVAL

1.Remove the front door finisher. Refer to "Removal and Installation" Removal and Installation.





2.Disconnect the harness connectors (A) from the main power window and door lock/unlock switch (1).
3.Remove two screws (B) and remove main power window and door lock/unlock switch (1) and finisher as an assembly.
4.Release pawls then separate main power window and door lock/unlock switch from switch finisher.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
When main power window and door lock/unlock switch is removed or replaced, it is necessary to perform the initialization procedure. Refer to "Work Procedure" Work Procedure.
Revision: March 20122013 Infiniti JX