Power Window and Door Lock/Unlock Switch Rh

POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Removal and Installation


REMOVAL

1.Remove front door finisher. Refer to "Removal and Installation" Removal and Installation.





2.Disconnect the harness connector from the power window and door lock/unlock switch RH (1).
3.Remove two screws (A) and the power window and door lock/
unlock switch RH (1) and finisher as an assembly.





4.Release four pawls then separate power window and door lock/
unlock switch RH (1) from switch finisher (2).
: Pawl

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
When power window and door lock/unlock switch RH is removed or replaced, it is necessary to perform the initialization procedure. Refer to "Work Procedure" Work Procedure.
Revision: March 20122013 Infiniti JX