Rear Power Window Switch

REAR POWER WINDOW SWITCH

Removal and Installation


REMOVAL

1.Remove the rear door finisher. Refer to "Removal and Installation" Removal and Installation.
2.Remove screws and the rear door armrest.





3.Disconnect the harness connector from the rear power window switch (1).
4.Remove two screws (A) and the rear power window switch (1)
and finisher (2) as an assembly.





5.Release four pawls then separate rear power window switch (1)
from switch finisher.
: Pawl

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
When rear power window switch (LH/RH) is removed or replaced, it is necessary to perform the initialization procedure. Refer to "Work Procedure" Work Procedure.
Revision: March 20122013 Infiniti JX