Procedures

STEERING COLUMN

Inspection


HOLE COVER SEAL, HOLE COVER AND LOWER SHAFT ASSEMBLY

Check each part of hole cover seal, hole cover and steering column and lower shaft assembly for damage or other malfunctions. Replace if necessary.

STEERING COLUMN ASSEMBLY

- Check each part of steering column assembly for damage or other malfunctions. Replace entire steering column assembly if any parts are damaged.





- Measure the length (L) as shown if vehicle has been involved in a minor collision. Replace steering column assembly if outside the specifications.





- Measure steering column rotating torque using Tool. Replace steering column assembly if outside the standard.















- Check tilt and telescopic mechanism operating range (L), (L) as shown.