Adjustment

REAR FINAL DRIVE ASSEMBLY

Adjustment


COMPANION FLANGE RUNOUT

Revision: March 20122013 Infiniti JX





Check for companion flange runout as follows:
- For companion flange face, fit a dial indicator (1) onto the companion flange face (inner side of the propeller shaft mounting bolt holes). For inner side of the companion flange, fit a test indicator (2) to the inner side of companion flange (socket diameter).
- Rotate companion flange to check for runout.
Companion flange runout: Refer to "Companion Flange Runout" Companion Flange Runout.
- If the runout value is outside the runout limit, follow the procedure below to adjust.
- Check for runout while changing the phase between companion flange and drive pinion by 90�
step, and search for the position where the runout is the minimum.
- If the runout value is still outside of the limit after the phase has been changed, replace companion flange.
- If the runout value is still outside of the limit after companion flange has been replaced, possible cause will be an electric controlled coupling.