Disassembly

GEAR RING

Disassembly

1.Remove adapter case. Refer to "Disassembly" Disassembly.
2.Remove drive gear assembly from the transfer case.
3.Remove gear ring bearing outer race (transfer case side) and gear ring bearing adjusting shim (transfer case side) from the transfer case. Refer to "Disassembly" Disassembly.





4.Remove gear ring bearing inner race (adapter case side) from ring gear shaft with the drift (A) [SST: ST33200000 (J-26082)]
and a replacer.





5.Remove gear ring bearing inner race (transfer case side) from gear ring with the drift (A) [SST: ST33061000 (J-8107-2)] and a puller.
6.Remove the drive gear mounting bolts.





7.Lightly tap adapter case with a plastic hammer to remove drive gear from the gear ring.
Revision: March 20122013 Infiniti JX





8.Remove gear ring oil seal from the gear ring with a puller (A)
[SST: KV381054S0 (J-34286)].
9.Perform inspection after disassembly. Refer to "Inspection" Inspection.