Door Mirror Motor
DOOR MIRROR MOTOR
Description
It makes mirror face operate from side to side and up and down with the electric power that automatic drive positioner control unit supplies.
Component Function Check
1. CHECK DOOR MIRROR MOTOR FUNCTION
Check the operation with "MIRROR MOTOR RH" and "MIRROR MOTOR LH" in "ACTIVE TEST" mode with
CONSULT.
Refer to "CONSULT Function" Scan Tool Testing and Procedures.
Is the inspection result normal?
YES- Door mirror motor function is OK.
NO- Refer to "Diagnosis Procedure" .
Diagnosis Procedure
Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.
1. CHECK DOOR MIRROR MOTOR INPUT SIGNAL
1.Turn ignition switch ON.
2.Check voltage between door mirror connector and ground.
Is the inspection result normal?
YES- Refer to "Component Inspection" .
NO- GO TO 2.
2. CHECK HARNESS CONTINUITY
1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit and door mirror.
3.Check continuity between automatic drive positioner control unit connector and door mirror connector.
Door mirror LH
Revision: March 20122013 Infiniti JX
Door mirror RH
4.Check continuity between automatic drive positioner control unit connector and ground.
Door mirror LH
Door mirror RH
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.
3. CHECK AUTOMATIC DRIVE POSITIONER CONTROL UNIT OUTPUT SIGNAL
1.Connect automatic drive positioner control unit.
2.Turn ignition switch ON.
3.Check voltage between automatic drive positioner control unit connector and ground.
Door mirror LH
Door mirror RH
Revision: March 20122013 Infiniti JX
Is the inspection result normal?
YES- GO TO 4.
NO- Replace automatic drive positioner control unit. Refer to "Removal and Installation" Service and Repair.
4. CHECK DOOR MIRROR MOTOR
Check door mirror motor.
Refer to "Component Inspection" .
Is the inspection result normal?
YES- Refer to "Intermittent Incident" Intermittent Incident.
NO- Replace door mirror actuator. Refer to "Removal and Installation" Removal and Installation.
Component Inspection
1. CHECK DOOR MIRROR MOTOR-I
Check that door mirror motor does not trap foreign objects and does not have any damage.
Refer to "Exploded View" Exploded View.
Is the inspection result normal?
YES- GO TO 2.
NO- Replace door mirror actuator. Refer to "Removal and Installation" Removal and Installation.
2. CHECK DOOR MIRROR MOTOR-II
1.Turn ignition switch OFF.
2.Disconnect door mirror.
3.Apply 12V to each power supply terminal of door mirror motor.
Is the inspection result normal?
YES- Inspection End.
NO- Replace door mirror actuator. Refer to "Removal and Installation" Removal and Installation.
Revision: March 20122013 Infiniti JX