Reclining Motor

RECLINING MOTOR

Description

- The reclining motor LH is installed to the seatback assembly.
- The reclining motor LH is activated with the driver seat control unit.
- The seatback is reclined forward/backward by changing the rotation direction of reclining motor LH.


Component Function Check


1. CHECK FUNCTION

1.Select "SEAT RECLINING" in "ACTIVE TEST" mode with CONSULT.
2.Check the reclining motor LH operation.





Is the operation of relevant parts normal?
YES- Inspection End.
NO- Perform diagnosis procedure. Refer to "Diagnosis Procedure" .


Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK RECLINING MOTOR LH POWER SUPPLY

1.Turn the ignition switch to ACC.
2.Perform "ACTIVE TEST" ("SEAT RECLINING") with CONSULT.
3.Check voltage between driver seat control unit harness connector and ground.





Is the inspection result normal?
YES- Replace reclining motor LH. Refer to "Removal and Installation" Removal and Installation.
NO- GO TO 2.

2. CHECK RECLINING MOTOR LH CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect driver seat control unit and reclining motor LH.
3.Check continuity between driver seat control unit harness connector and reclining motor LH harness connector.
Revision: March 20122013 Infiniti JX





4.Check continuity between driver seat control unit harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
Is the inspection result normal?
YES- Replace driver seat control unit. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace the malfunctioning part.
Revision: March 20122013 Infiniti JX