Telescopic Motor

TELESCOPIC MOTOR

Description

- The telescopic motor is installed to the steering column assembly.
- The telescopic motor is activated with the automatic drive positioner control unit.
- Compresses the steering column by changing the rotation direction of telescopic motor.


Component Function Check


1. CHECK FUNCTION

1.Select "TELESCO MOTOR" in "ACTIVE TEST" mode with CONSULT.
2.Check the telescopic motor operation.





Is the operation of relevant parts normal?
YES- Inspection End.
NO- Perform diagnosis procedure. Refer to "Diagnosis Procedure" .


Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK TELESCOPIC MOTOR POWER SUPPLY

1.Turn ignition switch OFF.
2.Disconnect telescopic motor.
3.Turn the ignition switch ON.
4.Perform "ACTIVE TEST" ("TELESCO MOTOR") with CONSULT.
5.Check voltage between telescopic motor harness connector and ground.





Is the inspection result normal?
YES- Replace telescopic motor. Refer to "Exploded View" Exploded View.
NO- GO TO 2.

2. CHECK TELESCOPIC MOTOR CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit.
3.Check continuity between automatic drive positioner control unit harness connector and telescopic motor harness connector.
Revision: March 20122013 Infiniti JX





4.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic drive positioner control unit. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace harness.
Revision: March 20122013 Infiniti JX