Removal and Installation

FUEL FILLER LID OPENER

Removal and Installation


REMOVAL

NOTE:





When fuel filler lid lock actuator (1) is not functioning correctly, pull the rod from inside the vehicle to open fuel filler lid assembly.
Revision: March 20122013 Infiniti JX





1.Remove fuel cap pin (1).





2.Remove TORX bolts (2) and fuel filler lid assembly (1).
3.Remove luggage side lower finisher LH. Refer to "LUGGAGE SIDE LOWER FINISHER : Removal and Installation" Luggage Side Lower Finisher.
4.Rotate lock nut counterclockwise and then remove lock nut.
5.Remove fuel filler lid lock actuator by releasing the pawl.
6.Disconnect harness connector from fuel filler lid lock actuator.
7.Remove fuel filler lock assembly by releasing the pawls.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation, check fuel filler lid assembly open/close, lock/unlock operation.
- After installation, apply touch-up paint (body color) to the head of fuel filler lid bolts.
Revision: March 20122013 Infiniti JX