Removal and Installation

FRONT FENDER

FRONT FENDER : Removal and Installation


CAUTION:
Use a shop cloths to protect the body from being damaged during removal and installation.

REMOVAL

1.Remove front fender protector. Refer to "FENDER PROTECTOR : Removal and Installation" Removal and Installation.
2.Remove front combination lamp. Refer to "Removal and Installation" Removal and Installation.
3.Release the clips and pawls using a suitable tool and remove hood ledge finisher.
4.Remove front fender outside lower molding. Refer to "Removal and Installation" .
5.Remove front fender bolts and front fender.

CAUTION:
Revision: March 20122013 Infiniti JX
Use care when removing the front fender. The front fender baffle foam adheres the front fender to the body side outer. Carefully release the baffle foam or damage to the front fender may occur.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation apply touch up paint (body color) to the head of front fender bolts.
- After installation, adjust the following components as necessary:
- Hood assembly: Refer to "HOOD ASSEMBLY : Adjustment" Adjustments.
- Front door: Refer to "DOOR ASSEMBLY : Adjustment" Adjustments.
Revision: March 20122013 Infiniti JX