Removal and Installation

INSIDE MIRROR

Removal and Installation


WITH RAIN SENSOR

Removal
1.Release rain sensor finisher pawls using a suitable tool, and remove the rain sensor finisher.
Revision: March 20122013 Infiniti JX
2.Disconnect the harness connector from the inside mirror.
3.Loosen TORX bolt and slide inside mirror upward to remove.
Installation
Installation is in the reverse order of removal.

WITHOUT RAIN SENSOR

Removal
1.Remove the inside mirror finisher.
2.Disconnect the harness connector from the inside mirror.
3.Loosen TORX bolt and slide inside mirror upward to remove.
Installation
Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX