Seat Slide Release Cable

SECOND ROW SEATS

Seat Slide Release Cable


LH BENCH SEAT

Removal
1.Remove LH bench seat cushion. Refer to "Seat Cushion" Seat Cushion.





2.Release the center recline finisher (1) pawls.





3.Release clip.





4.Remove screws (black arrow) and lift the seat cushion latch finisher (2) to remove.





Revision: March 20122013 Infiniti JX





5.Remove the seat slide release cable (1) from both LH side (A)
and RH side (B) of seat frame assembly (2)
a.Release (black arrow) the seat slide release cable (1) from the seat frame assembly (2).

CAUTION:
Note the cable routing for proper installation.





b.Release (black arrow) the seat slide release cable (1).
c.Separate the seat slide release cable (1) from the seat frame assembly (2).
d.Release cable end (A).
- LH side shown, RH side similar.










6.Separate the seat cushion latch release cable (3) from the seat slide release cable (2).
7.Release cable end (B) and position the seat cushion latch release cable (3) aside.
8.Separate the seat slide release cable (2) from the seat frame assembly (1).
9.Remove the seat slide release cable end (A) and the seat slide release cable.
Installation
Installation is in reverse order of removal.

CAUTION:
Route cables correctly for proper function.

RH SEAT

Removal
1.Remove RH seat cushion. Refer to "Seat Cushion" Seat Cushion.
Revision: March 20122013 Infiniti JX





2.Remove screws (black arrow) and lift seat cushion latch finisher (1) to remove.





3.Remove the rear finisher.





4.Remove the seat slide release cable (1) or (2) as necessary, from the seat frame assembly (3).
a.Release (black arrow) the seat slide release cable (1).
b.Separate the seat slide release cable (1) from the seat frame assembly (3).
c.Release cable end (A) and remove the seat slide release cable (1)
Installation
Installation is in reverse order of removal.

CAUTION:
Route cables correctly for proper function.
Revision: March 20122013 Infiniti JX