Mode Door Motor (Front)

POWER SUPPLY AND GROUND CIRCUIT

MODE DOOR MOTOR (FRONT) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK MODE DOOR MOTOR (FRONT) POWER SUPPLY

1.Turn ignition switch ON.
2.Check voltage between mode door motor (front) harness connector and ground.
Revision: March 20122013 Infiniti JX





Is the inspection result normal?
YES- GO TO 2.
NO- GO TO 4.

2. CHECK MODE DOOR MOTOR (FRONT) GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect mode door motor (front) connector.
3.Check continuity between mode door motor (front) harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair harness or connector.

3. CHECK INSTALLATION OF MODE DOOR MOTOR (FRONT) CONTROL LINKAGE

Check mode door motor (front) control linkage is properly installed. Refer to "Exploded View Front Door Motors" Exploded View - Front Door Motors.
Is the inspection result normal?
YES- Replace mode door motor (front). Refer to "MODE DOOR MOTOR : Removal and Installation Mode Door Motor (Front)" Removal and Installation - Mode Door Motor (Front).
NO- Repair or replace malfunctioning part.

4. CHECK MODE DOOR MOTOR (FRONT) POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect mode door motor (front) connector and A/C auto amp. connector.
3.Check continuity between mode door motor (front) harness connector and A/C auto amp. harness connector.





Is the inspection result normal?
YES- Replace A/C auto amp. Refer to "Removal and Installation" Removal and Installation.
NO- Repair harness or connector.