Meter Control Switch

METER CONTROL SWITCH

Removal and Installation


REMOVAL

NOTE:
The illumination control switch, twin trip odometer switch, and backup collision intervention (BCI) switch are serviced as an assembly.
1.Remove cluster lid A. Refer to "Removal and Installation" Cluster Lid A.





2.Remove the screws (A) from the illumination control switch (B).





3.Remove the screws (A) from the backup collision intervention (BCI) switch (if equipped) / twin trip odometer switch (B).
4.Disconnect the harness connector from the meter control switch.
5.Remove the meter control switch.

INSTALLATION

Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX