Off Position Warning Does Not Operate

OFF POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure


1. CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?
YES- GO TO 2.
NO- Perform trouble diagnosis relevant to DTC indicated.

2. CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter.
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis relevant to DTC indicated.

3. CHECK DOOR SWITCH

Check front door switch (driver side).
Refer to "Component Function Check" Door Switch.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK COMBINATION METER BUZZER

Check combination meter buzzer.
Refer to "Component Function Check" Meter Buzzer Circuit.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to "Component Function Check" Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. REPLACE BCM

- Replace BCM. Refer to "Removal and Installation" Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES- Inspection End.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
Revision: March 20122013 Infiniti JX