Removal and Installation

FRONT ROOM/MAP LAMP

Removal and Installation


CAUTION:
Do not attempt to separate the front room/map lamp assembly from the headlining prior to removing headlining, or damage to the components may occur.

REMOVAL

1.Remove the headlining. Refer to "Removal and Installation" Removal and Installation.





2.Remove the two bracket screws, then remove the front room/
map lamp assembly bracket (1) from front room/map assembly and position aside.
3.Disconnect the harness connectors from front room/map lamp assembly (3).
4.Release the nine back plate pawls (A) using a suitable tool and remove the front room/map lamp assembly (3).

CAUTION:
When removing, support front room/map lamp assembly (3)
by hand so it does not fall out and get damaged during the removal.
5.Remove the front room/map lamp back plate (2) from the headlining.

INSTALLATION

Revision: March 20122013 Infiniti JX
Installation is in the reverse order of removal.