Work Procedure

ADDITIONAL SERVICE WHEN REPLACING CAN GATEWAY

Work Procedure


1. SAVING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.
Refer to "Description" Description.
NOTE:
If "Before Replace ECU" of "Read / Write Configuration" can not be used, use the "Manual Configuration" after replacing CAN gateway.
- GO TO 2.

2. REPLACE CAN GATEWAY

Replace CAN gateway. Refer to "Removal and Installation" Service and Repair.
- GO TO 3.

3. WRITING VEHICLE SPECIFICATION

CONSULT Configuration
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to "Work Procedure" Configuration (CAN Gateway).
- WORK END
Revision: March 20122013 Infiniti JX