Transmission Control Systems: Service and Repair

DRIVE MODE SELECT SWITCH

Removal and Installation


REMOVAL

1.Remove the CVT shift selector handle. Refer to "Exploded View" Exploded View.
2.Remove the center console upper side finisher LH and RH. Refer to "Exploded View" Exploded View.
3.Remove the center console CVT finisher. Refer to "Exploded View" Exploded View.
4.Lift the console CVT finisher and disconnect the harness connectors.
5.Remove the console CVT finisher from vehicle.





6.Remove the drive mode select switch (2) from the console CVT
finisher (1) by prying the locking tabs, and push the switch through the top-side.

INSTALLATION

Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX