B2461

Description

Inputs the vehicle speed signal from combination meter via CAN communication.


DTC Logic


DTC DETECTION LOGIC

NOTE:
If DTC B2461 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SBC27, "DTC Logic".






DTC CONFIRMATION PROCEDURE


1. SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT

1.Turn ignition switch ON.
2.Check "Self-diagnostic result" with CONSULT.
Is DTC detected?
YES- Refer to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK COMBINATION METER

Check combination meter. Refer to "Work flow" Work Flow.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END