B2724

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

Turn ignition switch OFF, and wait for 10 seconds or more.
- GO TO 2.

2. DETECT DTC

CONSULT SELF-DIAGNOSIS
1.Turn ignition switch ON.
2.Perform "SONAR" self-diagnosis.
Is DTC "B2724" detected?
YES- Refer to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM CONFIGURATION OF SONAR CONTROL UNIT

1.Perform configuration of sonar control unit. Refer to "CONFIGURATION (SONAR CONTROL UNIT) : Special Repair Requirement" Configuration (Sonar Control Unit).
2.Perform DTC confirmation procedure. Refer to "DTC Logic" .
Is DTS DTC"B2724 SONAR CONTROL UNIT CONFIG ERROR" detected?
YES- Replace the sonar control unit. Refer to "Removal and Installation" Service and Repair.
NO- Check is complete.