C1805

C1805 VHCL HEIGHT ADJ DOWN

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.

2. CHECK DTC DETECTION

With CONSULT
1.Start the engine and wait 150 seconds or more.
2.Perform "Self Diagnostic Result" in "E-SUS".
Is "C1805" detected ?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK APPEARANCE

Visually check for malfunction of suspension components, crush of air tube, installation malfunction, or deformation of vehicle height sensor.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace damaged parts.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
Is the inspection result normal?
YES- Perform "STANDARD VEHICLE HEIGHT SETTING". Refer to "Work Procedure" Work Procedure.
NO- Repair or replace damaged part.