C1806

C1806 VHCL HEIGHT SEN FIX

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.

2. CHECK VEHICLE HEIGHT SENSOR FIXATION

With CONSULT
1.Start the engine.
2.Select "VHCL HEIGHT SEN" in "Data Monitor" in "E-SUS".
3.Drive vehicle and maintain the following conditions for 5 minutes or more.





Does the value of "VHCL HEIGHT SEN" change?
YES- INSPECTION END
NO- Go to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK APPEARANCE

Visually check for installation malfunction, or deformation of vehicle height sensor.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace damaged parts.

2. CHECK VEHICLE HEIGHT SENSOR

Check the vehicle height sensor. Refer to "Component Inspection" C1801.
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- Replace the vehicle height sensor. Refer to "Removal and Installation" Removal and Installation.