Hazard Function

HAZARD FUNCTION

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "FLASHER" in "ACTIVE TEST" mode.
3.Touch "LH" or "RH" to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK HAZARD LAMP

Refer to"TURN SIGNAL AND HAZARD WARNING LAMP SYSTEM : System Description" System Description.
Is the inspection result normal?
YES- GO TO 2.
NO- Refer to "Symptom Table" Exterior Lighting System Symptoms.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END