Removal and Installation

FRONT FENDER

FRONT FENDER : Removal and Installation


CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.

REMOVAL

1.Remove side step. Refer to "Removal and Installation" Removal and Installation.
2.Remove front over fender. Refer to "Removal and Installation" .
3.Remove front combination lamp. Refer to "Removal and Installation" Removal and Installation.
4.Remove front fender drip cover. Refer to "FRONT FENDER DRIP COVER : Removal and Installation"
5.Remove front fender cover. Refer to "Exploded View" Exploded View.
6.Remove front fender protector. Refer to "FENDER PROTECTOR : Removal and Installation" Removal and Installation.
7.Remove mounting bolts and remove front fender.

CAUTION:
An viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.
- After installation, adjust the following part.
- Hood assembly: Refer to "HOOD ASSEMBLY : Adjustment" Adjustments.
- Front door: Refer to "DOOR ASSEMBLY : Adjustment" Adjustments.