Selective Unlock Function Does Not Operate

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "DOOR LOCK-UNLOCK SET" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT" mode.
3.Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT".
Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" CONSULT Function.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "On" in "DOOR LOCK-UNLOCK SET".

2. REPLACE BCM

- Replace BCM. Refer to "Removal and Installation" Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.