Automatic Back Door Anti-Pinch Function Does Not Operate

AUTOMATIC BACK DOOR ANTI-PINCH FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK POWER SUPPLY AND GROUND CIRCUIT

Check automatic back door control module power supply and ground circuit.
Refer to "AUTOMATIC BACK DOOR CONTROL UNIT : Diagnosis Procedure" Power Supply and Ground Circuit.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK TOUCH SENSOR LH

Check touch sensor LH.
Refer to "LH : Component Function Check" Component Function Check.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK TOUCH SENSOR RH

Check touch sensor RH.
Refer to "RH : Component Function Check" Component Function Check.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. REPLACE AUTOMATIC BACK DOOR CONTROL MODULE

1.Replace automatic back door control module. Refer to "Removal and Installation" Automatic Back Door Control Module.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.