Side Camera Finisher Assembly

OUTSIDE MIRROR

SIDE CAMERA FINISHER ASSEMBLY : Removal and Installation


Disassembly

1.Remove door mirror assembly from front door panel. Refer to "DOOR MIRROR ASSEMBLY : Removal and Installation" Removal and Installation.
2.Remove glass mirror. Refer to "GLASS MIRROR : Removal and Installation" Glass Mirror.
3.Remove door mirror cover. Refer to "DOOR MIRROR COVER : Removal and Installation" Door Mirror Cover.





4.Remove side camera finisher (1) fixing screw (A).





5.Disconnect harness connector (B), and remove screws (C) and pawl (D) fixing the side camera finisher (1) to housing.










6.Remove side turn signal lamp fixing screws (E) and remove side turn signal lamp.
NOTE:
Pull slightly side camera finisher (1) covering side turn signal lamp bottom screw.
7.Remove side camera finisher assembly.
8.Remove around view camera. Refer to "Removal and Installation" Service and Repair.

Assembly

Assemble in the reverse order of disassembly.