Retained Power Operation Does Not Operate Properly

RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY

Diagnosis Procedure


1. CHECK DOOR SWITCH

Check door switch.
Refer to "Component Function Check" Door Switch.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK POWER WINDOW MAIN SWITCH

Check power window main switch system.
Refer to "POWER WINDOW MAIN SWITCH : Diagnosis Procedure" Power Window Main Switch.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK BCM POWER SUPPLY AND GROUND

Check BCM power supply and ground circuit.
Refer to "Diagnosis Procedure" Power Supply and Ground Circuit.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK SUNROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND

Check sunroof motor assembly power supply and ground circuit.
Refer to "Diagnosis Procedure" Power Supply and Ground Circuit.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK SUNROOF SWITCH

Check sunroof switch circuit.
Refer to "Component Function Check" Sunroof Switch.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.