Third Seat

THIRD SEAT

Disassembly and Assembly


SEATBACK

Disassembly
1.Remove the hinge cover.
1.Remove the seat cushion trim and seat cushion pad from seat cushion frame.
2.Remove the fixing screws, and then remove the hinge cover.
2.Remove the mounting bolts, and then remove the seatback assembly.
3.Open fastener (A) of seatback trim.





- LH side





- RH side
4.Remove clips that retain seatback board and seatback trim.
5.Remove the seatback board and the clips.





1.Slide and align the clips (B) to the holes on the seatback board (A) as shown in the figure, and then remove the seatback board (A).
2.Remove the clips after removing the seatback board.
6.Remove the seatback trim and seatback pad.





1.Remove the headrest holder.

CAUTION:
Before installing headrest holder check its orientation.
(front/rear and right/left)
2.Remove the seatback trim and pad from seatback frame.
3.Remove the hog rings to separate the seatback trim and seatback pad.
7.Remove the seatback silencer.
8.Remove the seatback inner arm cover (RH and LH).
Assembly
Assemble in the reverse order of disassembly.

CAUTION:
- Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with the seatback frame.
- When installing wire, be careful that it is not slackened.

SEAT CUSHION

Disassembly
1.Remove the seat cushion trim and seat cushion pad.
1.Remove the seat cushion retainer.
2.Remove the seat cushion trim and seat cushion pat from seat cushion frame.
3.Remove the hog rings to separate the seatback trim and seatback pad.
2.Remove the hinge cover.
Remove the fixing screws, and then remove the hinge cover.
3.Remove the mounting bolts, and then remove the seat cushion assembly.
4.Remove the mounting nuts, and then remove the seat hinge assembly.
Assembly
Assemble in the reverse order of disassembly.

CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord with the seat cushion pad wire.