Removal and Installation

FRONT SEAT

Removal and Installation


REMOVAL


CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.
- When removing and installing, 2 workers are required so as to prevent it from dropping.
1.Remove the headrest (without headrest display only).
2.Remove the front slide cover.





a.Front outer slide cover
- Slide the seat to the rearmost position.
- Pull up the front edge of the front slide cover to release the pawls.
- Slide the front slide cover forward to release the pawls.










b.Front inner slide cover
- Slide the seat to the rearmost position.
- Pull up the front edge of the front slide cover to release the pawls.
- Slide the front slide cover forward to release the pawls.





3.Remove the mounting bolts on the front side of the front seat.
4.Remove the rear slide cover.





a.Rear inner slide cover
- Slide the seat to the foremost position.
- Pull up the rear edge of the rear inner slide cover to release the pawls.
- Slide the rear inner slide cover rearward to release the pawls.










b.Rear outer slide cover
- Slide the seat to the foremost position.
- Pull up the rear edge of the rear outer slide cover to release the pawls.
- Slide the rear outer slide cover rearward to release the pawls.





5.Remove the mounting bolts on the rear side of the front seat.
6.Set seatback in a standing position.
7.Slide the seat to the rearmost position.
8.Disconnect harness connectors under the seat and remove harness securing clips.

CAUTION:
Before removal, turn ignition switch OFF, disconnect battery negative terminal and then wait for at least 3 minutes or more.
9.Remove seat from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- Before installation, turn ignition switch OFF, disconnect battery negative terminal and then wait for at least 3 minutes or more.
- Clamp the harness in position.
NOTE:
After installing the front seat, perform additional service when removing battery negative terminal. Refer to
"ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description" Description.