Combination Meter Buzzer

COMBINATION METER BUZZER

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
3.Touch "Key", "Knob" or "Take Out" to check that it works normally.
Is the inspection result normal?
Yes- Combination meter buzzer is OK.
No- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK COMBINATION METER BUZZER CIRCUIT

Refer to "Component Function Check" Meter Buzzer Circuit.
Is the inspection result normal?
Yes- GO TO 2.
No- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END