Removal and Installation

PUDDLE LAMP

Removal and Installation


CAUTION:
- Disconnect the battery cable from negative terminal or remove the fuse.
- Never touch puddle lamp directly by hand. Keep grease and other oily substances away from it.
- Never touch puddle lamp by hand while it is lit or right after it is off.
- It is prohibited to disassemble puddle lamp.
- Always replace puddle lamp as an assembly, when replacing.

REMOVAL

1.Remove door mirror assembly. Refer to "DOOR MIRROR ASSEMBLY : Removal and Installation" Removal and Installation.
2.Disconnect puddle lamp harness connector terminal from door mirror harness connector.





3.Disengage base cover fixing pawls using a small flat-bladed screwdriver (A), and then remove base cover.

CAUTION:
- Apply protective tape (B) around the base to protect the surface from damage.
- Apply protective tape to small flat-bladed screwdriver.










4.Disengage puddle lamp fixing pawls, and then remove puddle lamp (1) from base cover (2).






INSTALLATION

Install in the reverse order of removal.