Removal and Installation

FRONT FOG LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.Remove front fender protector. Refer to "FENDER PROTECTOR : Removal and Installation" Removal and Installation.
2.Remove front fog lamp finisher.
3.Disconnect front fog lamp harness connector.
4.Remove front fog lamp fixing screw.
5.Disengage pawl, and then remove front fog lamp.

INSTALLATION

Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to"Description" Description.