Removal and Installation

SIDE TURN SIGNAL LAMP

Removal and Installation


CAUTION:
Disconnect battery negative terminal or remove the fuse.

REMOVAL

1.Remove the door mirror. Refer to "DOOR MIRROR ASSEMBLY : Removal and Installation" Removal and Installation.
2.Remove the door mirror glass. Refer to "GLASS MIRROR : Removal and Installation" Glass Mirror.
3.Remove the side camera finisher. Refer to "DOOR MIRROR ASSEMBLY : Disassembly and Assembly" Disassembly and Assembly.





4.Remove side turn signal lamp fixing screws (E), and then remove side turn signal lamp (with side turn signal lamp models only).
NOTE:
Pull slightly side camera finisher (1) covering side turn signal lamp bottom screw.

INSTALLATION

Install in the reverse order of removal.