Inspection After Removal

REAR WHEEL HUB AND HOUSING

Inspection


INSPECTION AFTER REMOVAL

Wheel Hub and Bearing Assembly
Check the wheel hub and bearing assembly for wear, cracks, and damage. Replace if necessary.
Axle Housing
Check the axle housing for wear, cracks, and damage. Replace if necessary.
Ball Joint Inspection
Check for boot breakage, axial looseness, and torque of suspension arm ball joint. Refer to "Inspection and Adjustment" Inspection.

INSPECTION AFTER INSTALLATION

1.Adjust parking brake operation (stroke). Refer to "Inspection and Adjustment" Service and Repair.
2.Check wheel alignment. Refer to "Inspection" Rear Suspension Alignment Inspection.
3.Adjust neutral position of steering angle sensor. Refer to "Work Procedure" Work Procedure.
4.Adjust levelizer adjustment of height sensor. Refer to "LEVELIZER ADJUSTMENT : Special Repair Requirement" Special Repair Requirement.
5.Check standard vehicle height setting of vehicle height sensor. Refer to "Work Procedure" Work Procedure.