Information Display (ASCD)

INFORMATION DISPLAY (ASCD)

Component Function Check


1. CHECK INFORMATION DISPLAY

1.Start engine.
2.Press MAIN switch on ASCD steering switch.
3.Drive the vehicle at more than 40 km/h (25 MPH).

CAUTION:
Always drive vehicle at a safe speed.
4.Press SET/COAST switch.
5.Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.
Is the inspection result normal?
YES- INSPECTION END
NO- Go to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK DTC

Check that DTC UXXXX or P0500 is not displayed.
Is the inspection result normal?
YES- GO TO 2.
NO-1- Perform trouble diagnosis for DTC UXXXX.
NO-2- Perform trouble diagnosis for DTC P0500. Refer to "DTC Logic" For USA and Canada.

2. CHECK DTC WITH "COMBINATION METER"

Refer to "CONSULT Function" Combination Meter.
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis for DTC indicated.

3. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
Is the inspection result normal?
YES- Replace combination meter.
NO- Repair or replace.