Component Function Check

SEAT BELT BUCKLE SWITCH (PASSENGER SIDE)

Component Function Check


1. CHECK SEAT BELT WARNING LAMP FUNCTION

1.Turn ignition switch ON.
2.Sits in the passenger seat.
3.Fasten the seat belt (passenger side).
4.Check seat belt warning lamp function.





Is the inspection results normal?
YES- GO TO 2.
NO- Check seat belt warning lamp circuit. Refer to "Diagnosis Procedure" Diagnosis Procedure.

2. CHECK PRE-CRASH SEAT BELT CONTROL UNIT FUNCTION

With CONSULT
When checking "BUCKLE SW RH" on DATA MONITOR screen, check that ON/OFF display changes are synchronized with the insertion operation to the seat belt buckle.





Is the inspection result normal?
YES- Seat belt buckle switch (passenger side) circuit is normal.
NO- Check seat belt buckle switch (passenger side). Refer to "Diagnosis Procedure" Diagnosis Procedure.