Removal and Installation

POWER SEAT SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.





1.Remove seat cushion outer finisher (1). Refer to "SEAT CUSHION : Disassembly and Assembly" Service and Repair.
2.Remove screws (A).
3.Remove power seat switch (2) from seat cushion outer finisher (1).

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
"ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description" Description.