Removal and Installation

LIGHT & RAIN SENSOR

Removal and Installation


REMOVAL

1.Disengage light & rain sensor cover fixing pawls with a remover tool, and then remove rain senor cover.
2.Disconnect light & rain sensor connector.
3.Disengage both sides metal spring clips, and remove the light & rain sensor from the windshield.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- Surface of windshield should be cleaned.
- Never touch gel/adhesive of new part.
- Lock the metal spring clips and install the light & rain sensor securely.