Removal and Installation

POWER SOCKET

CONSOLE POWER SOCKET (CUP HOLDER) : Removal and Installation


REMOVAL

1.Remove console finisher assembly. Refer to "Exploded View" Exploded View.
2.Disconnect power socket connector and remove power socket illumination bulb.





3.Pull out inner socket (1) by pushing the ring pawl (B) from the inner socket hole (square) (C).





4.Remove ring (2) from console finisher assembly while pressing pawls.

INSTALLATION

Install in the reverse order of removal.
NOTE:
Align the cut outs of inner socket, ring and console finisher assembly.