Inspection and Adjustment

OIL PUMP, 2346 BRAKE, FRONT BRAKE PISTON

Inspection and Adjustment


INSPECTION AFTER DISASSEMBLY

Each Snap Ring
Check for deformation, fatigue or damage. If necessary, replace snap ring.
Each Spring Retainer
Check for deformation, fatigue or damage. If necessary, replace spring retainer.
2346 Brake Retaining Plate, Drive Plates, Driven Plates, and Dish Plate
Check facing for burns, cracks or damage. If necessary, replace retaining plate and dish plate.

ADJUSTMENT AFTER ASSEMBLY

2346 Brake Clearance





Set a dial indicator (A) as shown in the figure. Blow air into 2346
brake oil pressure hole (B), and measure 2346 brake clearance. If clearance is outside the specified value, adjust clearance by selecting an appropriate snap ring (1). Refer to "Oil Channel" Fluid Diagrams.





CAUTION:
Never exceed the specified air pressure value.