Disassembly

SIDE SHAFT

Disassembly

1.Drain the differential gear oil if necessary.
2.Remove the carrier cover bolts





3.Remove carrier cover to insert the seal cutter (A) [SST:
KV10111100 (J-37228)] between gear carrier and carrier cover.

CAUTION:
- Never damage the mating surface.
- Never insert flat-bladed screwdriver, this will damage the mating surface.





4.Remove side oil seal (right side) with a suitable tool.

CAUTION:
Never damage gear carrier.





5.Remove snap ring (hole side) with a suitable tool.





6.Remove differential side shaft assembly out of gear carrier with a suitable tool.
NOTE:
Tap on differential side shaft assembly from side gear side.
7.Remove snap ring (differential side shaft side).





8.Press differential side shaft out of differential side shaft bearing.

CAUTION:
Never drop differential side shaft.
9.Perform inspection after disassembly. Refer to "Inspection" Inspection.