Information Display Is Not Displayed

INFORMATION DISPLAY IS NOT DISPLAYED

Description

Information display is not displayed.
NOTE:
When the combination meter receives 4WD shift switch signal, it displays a message on the information display and inform the driver of 4WD mode status. About indication contents,



Diagnosis Procedure


1. CHECK 4WD SHIFT SWITCH

Perform trouble diagnosis for 4WD shift switch. Refer to "Diagnosis Procedure" P1813.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace error-detected parts.

2. CHECK 4WD MODE INDICATOR LAMP

Perform trouble diagnosis for 4WD mode indicator. Refer to "Diagnosis Procedure" 4WD Indicator Lamp.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace error-detected parts.

3. CHECK THE INFORMATION DISPLAY

Check that information except 4WD mode is displayed on information display.
Is the inspection result normal?
YES- Replace transfer control unit. Refer to "Removal and Installation" Service and Repair.
NO- Check information display. Refer to "On Board Diagnosis Function" Reading and Clearing Diagnostic Trouble Codes.