Rear RH

AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NORMALLY

REAR RH : Diagnosis Procedure


1. PERFORM INITIALIZATION PROCEDURE

Initialization procedure is performed and operation is confirmed.
Refer to "Work Procedure" Work Procedure.
Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 2.

2. CHECK ENCODER (REAR RH) CIRCUIT

Check encoder (rear RH) circuit.
Refer to "REAR RH : Component Function Check" Component Function Check.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.