Removal and Installation

FRONT DOOR GLASS

Removal and Installation


REMOVAL

1.Remove front door finisher. Refer to "Removal and Installation" Removal and Installation.
2.Disconnect door mirror harness connector and remove the fixing clip.
3.Remove front door inside seal.
4.Remove front door pull handle bracket.
5.Remove front door speaker. Refer to "Removal and Installation" Front Door Speaker.
6.Remove front door speaker bracket from front door panel.
7.Remove front door speaker harness from front door speaker bracket.
8.Remove front door glass sealing screen with a cutter tool.
NOTE:
Cute the butyl-tape so that some parts of the butyl-tape do not remain on the sealing screen, if the sealing screen is reused.
9.Reconnect front power window main switch, and then operate the power window main switch to raise or lower front door glass until the mounting bolts can be seen.
10.Remove front door glass mounting bolts.
11.Hold securely front door glass and pull it out of the sash to remove the front door glass from inside or outside front door panel.
12.Remove front door glass run.
13.Remove front door lower sash mounting bolt and pull it out of front door panel.

INSTALLATION

Install in the reverse order of removal.