Telescopic Motor

TELESCOPIC MOTOR

Component Function Check


1. CHECK FUNCTION

1.Select "TELESCO MOTOR" in "Active test" mode using CONSULT.
2.Check the telescopic motor operation.





Is the operation of relevant parts normal?
YES- INSPECTION END
NO- Perform diagnosis procedure. Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK TELESCOPIC MOTOR INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect telescopic motor connector.
3.Turn ignition switch ON.
4.Perform "Active test" ("TELESCO MOTOR") using CONSULT.
5.Check voltage between telescopic motor harness connector and ground.





Is the inspection result normal?
YES- Replace telescopic motor (built in steering column assembly).
NO- GO TO 2.

2. CHECK TELESCOPIC MOTOR CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit.
3.Check continuity between automatic drive positioner control unit harness connector and telescopic motor harness connector.





4.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic drive positioner control unit.
NO- Repair or replace harness or connector.