Composite Image Signal Circuit (AV Control Unit to Video Distributor)

COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO VIDEO DISTRIBUTOR)

Description

- DVD is played by inserting DVD into the AV control unit.
- DVD image signals are transmitted to the front display unit and video distributor.
- AV control unit receives the image signal from the front auxiliary input jacks and then transmits it to the front display unit.
- AV control unit receives the image signal from the USB (video data) and then transmits it to the front display unit and video distributor.
- Video distributor receives the image signal from the AV control unit and then transmits it to the headrest display unit.


Diagnosis Procedure


1. CHECK CONTINUITY COMPOSITE IMAGE SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect AV control unit connector and video distributor connector.
3.Check continuity between AV control unit harness connector and video distributor harness connector.





4.Check continuity between video distributor harness connector and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- Repair harness or connector.

2. CHECK COMPOSITE IMAGE SIGNAL

1.Connect AV control unit connector and video distributor connector.
2.Turn ignition switch ON.
3.Check signal between video distributor harness connector and ground.





Is the inspection result normal?
YES- Replace video distributor. Refer to "Removal and Installation" Service and Repair.
NO- Replace AV control unit. Refer to "Removal and Installation" Service and Repair.