Retract Motor Operation Signal Circuit

RETRACT MOTOR OPERATION SIGNAL CIRCUIT

Diagnosis Procedure


1. CHECK RETRACT MOTOR OPERATION SIGNAL CIRCUIT [BETWEEN AROUND VIEW MONITOR CON-

TROL UNIT AND DOOR MIRROR (PASSENGER SIDE)]
1.Disconnect around view monitor control unit connector and door mirror (passenger side) connector.
2.Check whether or not continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector is normal.





3.Check whether or not continuity between around view monitor control unit harness connector and ground is normal.





Is the check result normal?
YES- Perform diagnosis of door mirror (passenger side) retract motor operation signal circuit. Refer to
"Wiring Diagram" Door Mirror System.
NO- Repair the harnesses or connectors.