Around View Monitor Control Unit

DIAGNOSIS SYSTEM (AROUND VIEW MONITOR CONTROL UNIT)

CONSULT Function


CONSULT FUNCTIONS

CONSULT performs the following functions via the communication with the around view monitor control unit.






ECU IDENTIFICATION

Around view monitor control unit part number, software version, and hardware version can be identified.

SELF DIAGNOSIS RESULT

Refer to "DTC Index" Testing and Inspection.
- In CONSULT self-diagnosis, self-diagnosis results and error history are displayed collectively.
- The current malfunction indicates "CRNT". The past malfunction indicates "PAST".
- The timing is displayed as "0" if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected.
The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.
Freeze Frame Data (FFD)
The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.






DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
- Displays the status of the following vehicle signals inputted into the around view monitor control unit.
- For each signal, actual signal can be compared with the condition recognized on the system.






WORK SUPPORT







CONFIGURATION

Configuration includes functions as follows.